Learning to empty the Dyson vacuum correctly is a crucial skill to master if you have a Dyson. By properly emptying it, you can increase the lifespan of your vacuum and ensure it is in good condition for years to come. You may have noticed that a brand-new Dyson is an expensive purchase, so this is an obvious choice.
Understanding what to do to clean your Dyson vacuum will aid in avoiding the messy mess on your floor. Bagless vacuums are infamous due to their messy emptying procedures. If you’re not cautious, you could be able to spill a lot of dirt, dust, and other nasty things on your floors.
You will learn all about it through this Tutorial!
Also read: What did we find superb about Clean Dyson Vacuum?
How Do You Empty a Dyson Vacuum?
Dyson has many models available, and each has a distinct style as you’d expect; with every new model, the location of the buttons and the position of the dust cup change.
We’ll include the most models we can. If you can’t locate the model you want, you can still follow the steps. The design might differ, but the process must be the same!
What You’ll Need for this Tutorial
There’s no need for a ton of stuff to go through when you follow this guide. This is the entire list of items.
- A small toothbrush or other similar tools
- Dry towel
- Dyson’s tool for combination (if available)
1. How to empty the Dyson V-series Vacuum?
Credit: Woopnik
Today, the Dyson brand’s popularity as a vacuum manufacturer is predominantly around the V series of stick vacuums. You likely own a Dyson present at home. It’s likely to be one of the V-series models.
A final point to note before we go on: A major design shift beginning with the Dyson V8 model onward. In particular, the design of the dust cup was changed from an L-shaped shape to an inline. It is evident in the event you take a look at the image of the Dyson V8 and the Dyson vacuum V10 side-by-side.
Evidently, with the new look of the design of the dust container and the method of emptying it will be different, as well. Check out the video up there.
2. How to empty a Dyson Ball Vacuum?
Credit: Dyson
The Dyson Ball vacuum series has an easily detachable dust cup.
- You can separate the cup from it by pushing the button on the upper part of the container. After pressing the button, the whole cup will pop out.
- Grab the handle on the side of the cup and carry it to a garbage can.
- Move the top of the cup onto the can. The top of the cup goes down as far as you can in the container to prevent spills or dust that is kicked up.
- Release the button on top of the handle then the top of the cup should be opened upwards, allowing the contents to escape.
- If the majority of all dirt and other debris within the cup has been cleared, then gently shake or tap on the cup to shake off any dirt that remains.
- Close the door at the bottom of the cup. It should sound like a click to indicate correctly secured the door.
- Re-insert the cup into the vacuum, and then place it back into its correct position. There will be a click, and the cup shouldn’t move or move whenever you shake or tug it on again.
Also read: What’s so fabulous about Dyson Fluffy Head?
3. How to empty Dyson V10 to V15?
There are only three models available with the latest inline dust cup that are available: The Dyson V10, V11, and the most recent V15. Because the dust container is linked to the motor’s wand (and its motor), emptying it can be somewhat more difficult.
Credit: Unsharpen
- After shutting off the vacuum, remove the suction wand on the front. Make sure you press the Wand Release button (which can be located on the wand) and then pull off the vacuum.
- When you take the wand off, you can now see the door that releases the cup.
- Take the vacuum by the handle and point the cup toward the trash bin. Alternatively, you can place the vacuum upside down with the front part pointed toward the trash can. This can reduce how much dirt is kicked up.
- The dust cup’s bottom is a latch in red. Press the latch, and the door of the cup will be opened, releasing the contents within. Compared to the older model, this one is cleaner since you won’t be in direct contact with dirt!
- Suppose you’d like to take out the cup to clean it. There’s an alternative button located at the front of the cup with a small white Arrow. Click the button, and you’ll be able to remove the cup to clean.
- Repeat the steps above for reinstallation.
Credit: Dyson
4. How to empty Dyson V6 to V8?
Starting with Dyson V6 through V8, they’ll have an L-shaped dust container. For most users, this is the most well-known style; however, for those who are brand new to Dyson, this is what you should take care of when your cup is overflowing.
Credit: Honest Dad
- Make sure the vacuum is turned off completely. The power switch needs to be off and the cord disconnected from the outlet on your wall.
- There is a red button on the back of the dust cup, in the vicinity of where the vacuum handles, It can allow the bottom to open up the cup when it is pressed. Before doing this, ensure that you hold the vacuum on top of the trash container.
- If you wish to take off the entire dust cup for cleaning when the door has been opened, you can press the same button again, and the cup will fall off.
- You can wash or clean the cup however you like. Return the vacuum to its original position and click the bottom door to close.
Also read: Is Dyson V15 Detect worth buying?
What are the differences between the Inline and the L-shaped Dust Cup?
You might be thinking about the difference between the two cups, apart from the obvious physical difference and the different methods to empty the cups.
The dust cup that was once shaped like an L is fantastic, but it’s got one huge drawback: air movement.
When air is pumped into the vacuum head from the cleaning head and eventually reaches the dirt cup must be moved downwards. Then it is redirected upwards by the lower part of the container.
The air continues to flow through the shroud of the cyclone, changing direction three moments at the top to be directed towards an exhaust outlet.
After three redirections, the airflow is likely to have decreased in power significantly.
Also,
This is where the latest inline dust cup is used. Since the cleaning head, the cup with dust, and the motor along with the exhaust pipe are in an unbroken straight line; airflow will remain constant throughout the entire process.
This makes the V-series more efficient than older models by a large margin.
But that’s not all it offers. Although emptying is more complex, the latest inline models ( V11, V10, and V15) are cleaner in general.
It is possible to lower the dust container until it is near the bottom of the trash container before you release the dust. This can reduce the amount of dirt and dust significantly. Most users who are allergic to dust are highly pleased with the vacuums due to their “point-and-shoot” dust release mechanism.
5. How to empty your Dyson Omni Glide?
Credit: Dyson
This one is the company’s first hard floor vacuum exclusively designed for it. Here’s how you empty it:
- Remove the wand from any other tools.
- Close the trap door and move the bin back into its position.
- The dust canister should be lowered into a bin, and then hit the release button for the bin (red). This allows the canister to be lowered before the trap door is opened towards the top.
- Make sure that the vacuum is off. This Omni Glide doesn’t use the same trigger system Dyson uses in its traditional cordless vacuums. Therefore, you’re not likely to attempt draining the vacuum when operating.
6. How to empty Dyson corded vacuum cleaners?
Dyson corded vacuums use distinct methods of emptying their cordless vacuums. This is how you empty two of Dyson’s most well-known corded vacuums.
How to Clean Dyson Ball 2 and Dyson Ball Animal 2
Credit: Vacuum Wars
- Separate the cyclone and canister with the help of the tiny button at the top, then lift them off from the vacuum.
- Shut the door to the trap until it is clicked. Then reconnect the bin with the vacuum.
- Place the vacuum inside the container (ideally outside.)
- Turn off the power and disconnect the vacuum cleaner.
- Press the same button at the upper (near that handle) to open the trap door, and let the dirt fall out. Give it a gentle shake to eliminate additional dirt.
How do you empty of Dyson Small Ball Allergies
- Turn off the power and disconnect the vacuum cleaner.
- The vacuum should be placed deep in an empty bin (again, the ideal place for this is to be outside.)
- The same button is pressed to unlock the door to the trap. This will let dirt drop out of the bin.
- Remove the canister by pressing the red button next to the handle on the upper part of the bin.
- Then close the door, listen for a clicking sound, and reconnect the vacuum.
7. How Do You Clean the Dyson Vacuum’s Cyclone Shroud?
The shroud for the cyclone is the fun part that resembles an artichoke bulb inside your vacuum. This is the bread and butter of the vacuum, which allows it to produce the strong suction needed to lift debris and dirt.
The bottom is located inside the dust cup, which means it’s likely to be one of the most filthy places in the entire vacuum. This part is likely to become filthy and requires regular cleaning as time passes.
To make sure it is cleaned most effectively, you’ll need brushes. Luckily, most Dyson vacuums are equipped with a combo tool that also includes brushes.
Use this tool to scrub off any dust, lint, or other debris that has accumulated on the outside of the component. It is not possible to clean the internal components of the cyclone.
It is not recommended to put the cyclone into the water or wash it with detergent. Hence, it Consider it as an electric component.
Also read: Very Shocking expert testing of Dyson Cinetic Big Ball Animal
8. How Do You Clean Dyson Vacuum’s Dust Cup?
After a time, your trash can get very filthy. There could also be bits of dirt, debris, or pet hair that have gotten stuck within the interior. Therefore, every time you get a chance, take it out and wash it thoroughly to ensure it’s completely free of dirt.
The easy process is an integral component of learning to cleanse the Dyson vacuum. First, remove the dust cup as per the instructions we gave earlier. Then, rinse the cup under cold water. Utilize a toothbrush small enough to clean the small features inside the cup. Clean out any clogged particles inside the cup.
Cleanse the cup using a dry towel following the wash. Set the cup on the counter or somewhere with cool airflow for several minutes to let it dry.
Do not put the cup in the vacuum when it’s still moist. You may damage your Dyson.
Don’t clean the cup using dish soap, detergent, or any chemical. Use only clean water.
The Reasons You Shouldn’t Fill Up Your Vacuum
The Dyson upright vacuum is equipped with a fill-up line (or MAX line). It’s typically 3/4 of the max capacity in the cup.
If the cup’s contents are higher than this threshold, the vacuum’s suction efficiency will decrease. The impact will be particularly evident with big debris. When you first start the session, your top Dyson vacuum will likely have no difficulty getting them to the surface. When the vacuum is full, it might only be able to scrape the dust.
It’s a common problem for almost all vacuums on the market, not only Dyson vacuums.
However, you don’t need to be worried!
All Dyson vacuums feature a distinct mark on the cup to indicate the most appropriate time to empty. Pay attention and empty the cup when dirt has reached that level, and you’ll be good!
You may also be asking: “What if the vacuum is filled up before we have completed cleaning?”
It’s straightforward! All you need to do is empty the vacuum and then resume the task.
The Reasons Why You Should Be-Flush The Vacuum You Use Everyday Dyson Vacuum Daily
Many people have the routine of waiting until their vacuum’s dirt cup has reached its capacity before emptying it. This isn’t the ideal way to maintain the habit.
Although your Dyson was built and designed to last as long as possible, it’s still a quite sensitive device deep within. A small amount of debris trapped within the inner system could cause it to malfunction later on down the line.
If you let the dust cup overflow, the dirt and particles can get deep into the vacuum and then settle there. There’s a possibility that they might damage something essential inside the vacuum.
If you allow dust and dirt to accumulate in the dust bowl over a long period, the vacuum will be stale due to mold as well as all the bacteria and germs which, if left for the time, will start to accumulate within your vacuum.
We’re all aware of how difficult chores at home can be, and after you’ve cleaned the house to the end of the day, you won’t wish to tackle any other chores. However, it’s still more beneficial to put in less effort and empty your cup before removing the vacuum to avoid putting your health at risk.
Also read: How good is Dyson Omni Glide?
The Vacuum Feels Hot When It’s Full. Dust Cup Is Full: What’s the Issue?
Your Dyson is probably experiencing heat issues.
In addition to sucking in dirt and debris, the Dyson additionally uses its vacuum to keep it cool. If the dust container is overflowing, the vacuum cannot provide enough airflow going across the air.
If this happens, the motor of your vacuum can rapidly heat up. Once it has reached an amount, it stops itself to prevent your entire unit from heating up.
All you need to do is allow it to cool down for approximately 30 minutes, then empty the cup of dust, and you can use it in the same way as before.
There’s a third reason, as well.
As we’ve mentioned before, dirt and other debris could enter the vacuum’s interior systems when the container is overflowing. The dirt may get into the filters and block them, preventing airflow. This can make your vacuum overheat whenever this occurs.
Conclusion
This is all you need to be aware of when emptying the Dyson vacuum! It’s not difficult as you observe. Cleaning and emptying the vacuum can become your second reflex in just two or three weeks.
Be sure to take treatment for your Dyson vacuum, and we’re sure that it will be there for you for a long time!