Broken Vacuum: How to Diagnose?

You are currently viewing Broken Vacuum: How to Diagnose?

The mechanics of your vacuum cleaner may be straightforward, but repairs and maintenance are needed. There are a variety of vacuum-related issues you can resolve easily on your own, which could save you money as well as time.

Here, we’ve provided the most frequently occurring problems that can cause a vacuum to break.

Broken Vacuum: How to Diagnose?

1. The Vacuum Is Not Powering On

Broken Vacuum How to Diagnose 3

If your cleaner cannot begin to turn on, the initial thing to do is ensure that there is electricity. It’s also possible the plugs aren’t connected to the socket, have fallen out, or have been connected to a damaged or defective outlet. You can try charging the battery if the vacuum is not cordless.

The cord that is used to vacuum can be the cause of the problem. Make sure the prongs aren’t bent or damaged.

Also, ensure that your vacuum has bags installed. Some vacuums do not function without bags due to an infallible trigger. Also, it’s recommended that the bag be replaced if it’s more than half full.

Examining the machine’s pre-filter is also recommended and ensuring it’s not brittle or filthy. The pre-filter should be maintained regularly to prevent damage and extend the life of your machine.

2. The Vacuum Doesn’t Pick Up The Debris

Broken Vacuum How to Diagnose 1

It is important to examine the brush roll in case your vacuum has left behind debris, and there’s a lack of suction. The bristles of the brush could wear out and need to be replaced if they do not extend further than the bottom of the vacuum.

Another cause of this issue could be a blocked or broken hose. To discover the reason, take the hose off, look for any debris remnants, and try to push them out. Also, you should examine the home for cracks or leaks.

3. The Vacuum Is Not Staying On

Look at the circuit breaker, which is usually on the powerhead of your vacuum cleaner, if it is still shut off. If the light is red, the build-up of particles on your brush roll might be why your machine is short-circuiting.

It’s best to get rid of the obstruction and reset the breakers. This kind of problem that you are experiencing with your vacuum cleaner can also be caused due to damaged power cords.

4. The Vacuum Cleaner Is Particularly Noisy

Broken Vacuum How to Diagnose 2

One of the main reasons for odd sounds coming from your device is an obstruction in the pipe. A different possibility could be that your belts have been damaged or are loose. Change the vacuum belt if you notice it is damaged, excessively loose, or firmly pulled.

It could be time to consider repairs to your vacuum cleaner If you’ve already narrowed down the list of possible maintenance issues, but your machine isn’t working properly.

5. The Vacuum Cleaner Loses Suction

Broken Vacuum How to Diagnose 4

The poor suction of the vacuum may be mistakenly interpreted as using the incorrect height arrangement. It is important to ensure that the vacuum level is appropriate to the surface type.

Also, ensure the bag isn’t overloaded or blocked. Make sure to always change bags when they’re over half-full.

Check the other components of the vacuum, which could be susceptible to obstruction or accumulation of debris. It is typical to experience obstructions in the brush rolls, filters, or hose. Simple household tools like scissors can be used to eliminate hair, as well as other debris that is trapped in the filter.

Filters must also be examined in vacuum cleaners equipped with HEPA filtering devices. Based on the type of use, the filter must be replaced at least every 3-6 months. A well-maintained filter is typically white.

Leave a Reply